Limitation of function with BM-DN100 / BT-DN110

*1 Shifting adjustment mode for MU-S705, MU-UR500 and MU-UR510 is not supported (need E-TUBE PROJECT to adjust)

*2 Not supported by E-TUBE PROJECT Cyclist

*3 A designated control switch and/or the combination SW-M9050/SW-M8050-L with SC-M9050/SC-M9051/SC-MT800 is required to operate

*4 The system accepts just 1 unit with wireless chip (doesn't work if plural units with wireless chip are connected)

*5 Need to change switch setting by E-TUBE PROJECT

*6 SC-M9050, SC-M9051 or SC-MT800 is required for SYNCHRONIZED SHIFT in MTB category

*7 This unit has SD300 port, and needs EW-AD305 for connection with SD50 port unit

*8 Only supported by E-TUBE PROJECT Cyclist

*9 For front single models only. Cannot be used in combination with a front derailleur.

Limitation of function with SM-BMR1 / SM-BMR2 / SM-BTR2

*1 SC-S705

• Front derailleur position will not appear on display.

• Recovery from Rear derailleur protection function is not available.

• Front / Rear derailleur adjustment mode is not available. Use E-TUBE PROJECT software.

• SC-S705 has only 1 SD50 port for ST / SW.

• SC-S705 may not turn on the display by front shift switch.

*2 SM-BCR2 requires any device which has charging port.

　 SM-EW67-A-E (Junction [A]) is not compatible with SM-BCR2 and SM-BTR2.

*3 SC-M9050 is required for SYNCHRONIZED SHIFT in case with MTB-type Rear Derailleur

*4 SYNCHRONIZED SHIFT is not available with Road-type Rear Derailleur

*5 Shifting adjustment mode for MU-S705 , MU-UR500 and MU-UR510 is not supported (need E-TUBE PROJECT to adjust)

*6 Need to change switch setting by E-TUBE PROJECT

*7 This unit has SD300 port, and needs EW-AD305 for connection with SD50 port unit

*8 Only supported by E-TUBE PROJECT Cyclist

*9 Not supported by E-TUBE PROJECT Cyclist

*10 For front single models only. Cannot be used in combination with a front derailleur.