Compatibility chart of E-TUBE PROJECT Cyclist/Professional v5.3.4 C-473
Di2 with BT-DN300
Limitation of function with BT-DN300
*1 Wireless DUAL CONTROL LEVERs must be paired Right and Left (It's not allowed to choose two of right side units or two of left side units)
*2 There is no limitation to connect switch unit for right side or left side unit in case of it's wired connection.
*3 Wired connection to BT-DN300 only.
*4 EW-AD305 is needed.
*5 These rear derailleurs are able to work properly for adjusting and shifting in case of switch unit (SW/ST) and BT-DN300 are connected by cables.
Di2 with BM-DN100 / BT-DN110
BT-DN110-A is displayed as BT-DN110 on E-TUBE PROJECT
Limitation of function with BM-DN100 / BT-DN110
*1 Shifting adjustment mode for MU-S705, MU-UR500 and MU-UR510 is not supported (need E-TUBE PROJECT to adjust)
*2 Not supported by E-TUBE PROJECT Cyclist
*3 A designated control switch and/or the combination SW-M9050/SW-M8050-L with SC-M9050/SC-M9051/SC-MT800 is required to operate
*4 The system accepts just 1 unit with wireless chip (doesn't work if plural units with wireless chip are connected)
*5 Need to change switch setting by E-TUBE PROJECT
*6 SC-M9050, SC-M9051 or SC-MT800 is required for SYNCHRONIZED SHIFT in MTB category
*7 This unit has SD300 port, and needs EW-AD305 for connection with SD50 port unit
*8 Only supported by E-TUBE PROJECT Cyclist
*9 For front single models only. Cannot be used in combination with a front derailleur.
Di2 with SM-BMR1 / SM-BMR2 / SM-BTR2
Limitation of function with SM-BMR1 / SM-BMR2 / SM-BTR2
*1 SC-S705
-
Front derailleur position will not appear on display.
-
Recovery from Rear derailleur protection function is not available.
-
Front / Rear derailleur adjustment mode is not available. Use E-TUBE PROJECT software.
-
SC-S705 has only 1 SD50 port for ST / SW.
-
SC-S705 may not turn on the display by front shift switch.
*2 SM-BCR2 requires any device which has charging port.
SM-EW67-A-E (Junction [A]) is not compatible with SM-BCR2 and SM-BTR2.
*3 SC-M9050 is required for SYNCHRONIZED SHIFT in case with MTB-type Rear Derailleur
*4 SYNCHRONIZED SHIFT is not available with Road-type Rear Derailleur
*5 Shifting adjustment mode for MU-S705 , MU-UR500 and MU-UR510 is not supported (need E-TUBE PROJECT to adjust)
*6 Need to change switch setting by E-TUBE PROJECT
*7 This unit has SD300 port, and needs EW-AD305 for connection with SD50 port unit
*8 Not supported by E-TUBE PROJECT Cyclist
*9 Only supported by E-TUBE PROJECT Cyclist
*10 For front single models only. Cannot be used in combination with a front derailleur.